GPR | Mining Safety

Fast and safe: examination of mining stability with PRIS

Utmost safety when working underground requires that the formation of cracks and separations in the mine ceiling (ridges) are recognised at an early stage and can be observed closely.

Safety underground

For this field of application, RST developed and has successfully tested a special measuring device for a period of two years: With a success rate of almost one hundred per cent, PRIS (Potash Roof Inspection System) uses GPR radar technology in order to precisely map the type and number of cracks. 

Due to the extremely high resolution of the PRIS system, even Cracks can be detected which are really close to the surface. The early detection of the first warning signals allows to implement the necessary safety measures just in time.

A further advantage of the PRIS system is of vital importance:
The measuring device works without touching the rock surface. Collecting the required data thus is considerably accelerated.

During the measuring process, PRIS is installed on a trolley which enables the system to scan the ridges evenly at a speed of 5km/h.

 

 

PRIS (Potash Roof Inspection System)

  • originally developed for the use in potash mining
  • measurements at penetration depths up to three metres in salt and stone
  • detection of very fine cracks
  • differentiation between normal geological boundaries like e.g. enclosed clay layers, separations and cracks

Selected services of the RST portfolio:


Currently, there are no messages availabe.